Display Loggers

eTesta’s display loggers combine bright CAN displays with powerful logging capabilities and easy configuration, perfect for automotive, motorsports, and industrial applications.

Featuring

High brightness > 850 NITS
Fast < 1sec boot
MoTeC M1 Compatibility
Optional, Internal GPS
Easy Configuration

New, affordable line of display loggers. Focus has been to keep it affordable, fast bootup (<1s) and easy to configure. Display positions, logging rates and channels can be changed directly with a simple CAN Message. Settings can be also changed with our display_Configurator tool. Beauty is that the tool can be installed and run from the same USB disk where the data is collected to.

Versions

2 designs: 5" color or Black/White OLED. Incredibly bright, 850 NITS display so values can be seen in bright sunlight.

Compatibility

MoTeC, Haltech and of course compatible with all CAN devices. Over 1000 channels are now available in the display itself (All MoTeC DBC, Haltech, eTesta, Yamaha, BMW PT-CAN, MaxxECU messages are already in the device). This way the display can be changed on the fly, even by another CAN device. This way configuration is incredibly easy, no need to mess with multipliers etc... Just select the channel you want to show in which position.

Configuration

Display configuration is done with the Display Configurator tool. It is a single file executable that can be run directly from the USB card, without installation.

System is designed so that all needed tools are in the same disk where data is logged to and tool can be used in any PC. Configurations can be saved to a file and can be simply sent from it to the display.

Configuration can be loaded by sending messages thru CAN or loaded from the USB disc when the display boots up.

Unique Features

Other unique feature is that enumerators and units are supported natively. Instead of numbers, you get a clear text, so "Active" instead of 1. Also units are supported: If channel units are set for the channel, it is also shown. So, coolant temp would show 80 C.

Lap timing and gain/loss, GPS time based brightness etc...

Logging

USB Logging is built-in and all configured messages can be logged. Logging rates are from 1-100Hz. Data is stored in csv format.

Lap timing can be done thru MoTeC M1 ECU (Lap Number, Lap Time Running, Lap Distance channels must be sent from the ECU) or from any GPS. Display brightness is adjusted automatically from the GPS Time.

Analysis Tool

Analysis tool is also available shortly and 1 license is Free with the Display purchase. Analysis tool has unique features:

Small Size: Currently 22MB.
Data is shown in your Web browser
Multiple modes are available: Lap, Lapless, Rally, Drag.
Auto Analyze: Analyzes the data automatically against the Ref lap and creates notes.
Shade: Shows areas where you are performing better than Reference lap
Time Difference: Shows with red where you are loosing time and with green where gaining
Supports Haltech logs also.
You can send your data as HTML and can be viewed with a browser without any additional tools or licenses. (License is required to generate HTML but can be viewed without license)

Click pictures below to see in high quality.

More details will be available shortly in separate Analysoi page. Stay tuned...

Protection

5" Display is designed to fit MoTeC C125 cases made by GB Racing.

Specification

Display sizes	800x480 5" Color 276 x 84 Black/White OLED
Display Brightness	850 NITS, controlled automatically from GPS Time
Operating voltage	8 - 36V
Boot time	< 1s
Connectivity	CAN bus, 500k - 1Mbit
Compatibility	All CAN Bus devices. Configured for MoTeC M1, Haltech, MaxxECU. BMW E90 PT-CAN.
GPS	Optional. Internal, 25Hz GNSS.
GPS to CAN	Yes. MoTeC System 1.4 format. Display can send GPS data to the MoTeC M1 ECU.
Logging	Optional, USB.
Logging format	CSV
Logging speeds	1-100Hz
Lap timing	Included in basic display. Either from: - From internal GPS or - From external GPS connected to CAN
Configuration tool	Available, but not needed. Display can be configured thru CAN bus by any CAN device. Configuration can also be loaded from USB disc if needed when there is no CAN available.
Display protection	GP Racing cover or screen cover

Smaller, Black and White 850 NITS OLED display for motocross, enduro and snowmobiles, all devices where the display can be installed into the handlebar or space is limited. MoTeC and Haltech compatible, same method and functionality as the bigger brother. Display is equipped with logging as the 5" model.

Availability and Pricing

- Available for pre-order. Contact us for details

Introductory pricing:

- Display only: 399EUR

- Logging option: +100EUR

- Internal GPS option: +399EUR. Logging option included for free.